OBDKey® Product Range. OBDKey® Units - The OBDKey OBD USB, OBDKey OBD WLAN and OBDKey OBD Bluetooth units are available to purchase by themselves (software CD is supplied). It works with KL (VagCom 409), ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, and CANtieCAR interfaces. Downloading do not turn off target samsung tablet 10.1. Bluetooth OBDKey, ELM 327 and OBDLink interfaces are fully supported but not recommended for special functions like PROXI Alignment, remote control programming, IMA coding, etc.
03-31-2017, 10:07 PM
Fiat Multiecuscan v3.1 FULL Registered
Fiat Multiecuscan is a vehicle diagnostic software with advanced functions. It allows you to perform various diagnostics tasks on the supported vehicles/modules. In order to use the software you need an interface. The following interfaces are currently supported by the software:
KL (also known as VagCom 409), ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, CANtieCAR.
- O.S.: Windows 7, Windows 8, Windows 8.1, Windows 10
- CPU: Pentium/Athlon 2 GHz or higher
- RAM: 512 MB of system memory
- Hard Drive: 100 MB of available space
- Optical Drive: CD-ROM
Contact US for more details about how to buy this manual.
Users browsing this Product: 2 Guest(s)
OBD II Scan Tool
OBD-2 Vehicle Explorer Scan Tool Browser - Browser for automotive OBD-2 networks.View up to 255 servers in your car at the same time, send and receive messages, down load data, scan network, with indexed search and firewall options.Analyze over 1200 possible variables from your car in real time or inlcudes torque, knock retard, boost and misfire enhanced powertrain specfic analog.
- Publisher: Alex C. Peper
- Home page:www.obd-2.com
- Last updated: January 31st, 2012
AEB OBD ScanTool
OBD ScanTool is a software from A.E.B, S.p.a that enables field reprogramming of the hand-held AEB 214 OBD II (On Board Diagnostics) tester for all motor vehicles that are equipped with OBD systems. Such motor vehicles are usually manufactured in USA or Europe. OBD II standard is supported in the USA, while in Europe, EOBD standard is supported.
- Publisher: A.E.B
- Last updated: September 7th, 2015
OBD-PC Link allows you to view the information you retrieved from your vehicle, on your PC. You can also print out the cusotmizable reports, look up DTC definitions and find the meaning of some of the most common obd2 terms and abbreviations. To link, connect your tol to your PC using the rs232 cable provided.
- Publisher: Innova Electronics
- Last updated: December 2nd, 2009
OBD II logger
OBD-II is the protocol used by all cars built after 1996. If you want your PC or laptop to read some of the data from the 'Computer' in your car then you need some kind of OBD to RS-232 interface. There are many OBD-II interfaces out there, but most of them are very expensive. You can make your own interface if you know a bit about electronics and know how to make your own PCB boards.
- Publisher: OBD-II
- Last updated: April 19th, 2008
PIC10F Simulator IDE
PIC10F Simulator IDE is a powerful application that supplies PIC10F developers with user-friendly graphical development environment for Windows with integrated simulator (emulator), Basic compiler, assembler, disassembler and debugger.PIC10F Simulator IDE currently supports the following microcontrollers from the Microchip PICmicro 10F, 12F and 16F product lines.
- Publisher: Oshon Software
- Last updated: April 25th, 2013
Silicon Laboratories CAN OBD Reader Reference Design Kit
On-Board Diagnostics (OBD) is an automotive protocol supported by current vehicles to capture and report diagnostic data over a Controller Area Network (CAN) bus. The Silicon Labs CAN OBD Reader Reference Design use the CAN peripheral of the C8051F502 microcontroller (MCU) and interfaces to the OBD-II port in a vehicle to retrieve the diagnostic error codes and status information.
- Publisher: Silicon Laboratories, Inc.
- Last updated: April 13th, 2010
PCMSCAN is a fully featured generic OBD-II scanner and diagnostic tool that supports a wide variety of OBD-II hardware interfaces.
- Publisher: Palmer Performance Engineering, Inc.
- Home page:www.palmerperformance.com
- Last updated: November 17th, 2009
Skyline-OBD is an OBD-II preformance and diagnostic tool for any device that runs Microsoft Windows operating system.Main features:- Live data chart.- Diagnostic trouble codes.- Control panel: auto connection.- Reset OBD adapter.- User friendly interface.
- Publisher: Keffie Studio
- Home page:sourceforge.net
- Last updated: March 3rd, 2017
Multiecuscan can be used to perform various diagnostics tasks on vehicles. It works with KL (VagCom 409), ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, and CANtieCAR interfaces. Bluetooth OBDKey, ELM 327 and OBDLink interfaces are fully supported but not recommended for special functions like PROXI Alignment, remote control programming, IMA coding, etc.
- Publisher: multiecuscan
- Home page:www.multiecuscan.net
- Last updated: December 12th, 2018
Flash Magic is a tool that can be used to program flash-based NXP microcontrollers using serial or Ethernet port. It provides a simple interface where you can select the target device, COM port, oscillator frequency, baud rate, and the source file in HEX format.
- Publisher: Embedded Systems Academy, Inc.
- Home page:www.flashmagictool.com
- Last updated: September 7th, 2020
Ponyprog is very powerful and popular microchip programmer. Ponyprog enables the user to program EEPROM, FLASH and PIC's using user friendly tools and multiple programmer types.Ponyprog supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.
- Publisher: Claudio Lanconelli
- Last updated: August 2nd, 2017
ScanTool.net for Windows
ScanTool.net is open-source software originally designed by ScanTool developers. It offers basic functionality, such as reading and erasing diagnostic trouble codes and displaying generic OBD real-time parameters. This program must be used with a ScanTool.net OBDII interface
- Publisher: ScanTool.net, LLC
- Home page:www.scantool.net
- Last updated: August 21st, 2013
Code Composer Studio
It includes an optimizing C/C++ compiler, source code editor, project build environment, debugger, profiler, and many other features. The intuitive IDE provides a single user interface taking you through each step of the application development flow. Familiar tools and interfaces allow users to get started faster than ever before.
- Publisher: Texas Instruments Incorporated.
- Last updated: December 11th, 2017
STM32 ST-Link Utility
The main window is composed of three zones and three bars, as follows: memory display zone, device information zone, and memory content zone. The title bar shows the name of the current menu, the menu bar is used to access the following STM32 ST-LINK utility functions: file menu, edit menu, view menu, target menu and the help menu.
- Publisher: STMicroelectronics
- Home page:www.st.com
- Last updated: June 6th, 2014
Obdkey 1.40 Usb
OBDToolbox is a cross platform Qt based application for automobile diagnostics, data logging, and visual display of collected information with any OBD-II compatible vehicle through an ELM327 interface. Realtime Graphing, Gauges, and Information analysis.
- Publisher: malcom2073
- Last updated: September 21st, 2014
OBD Auto Doctor
At some point, everyone who owns a car has to deal with mechanical problems. In order to fix them, you can either take the car to a mechanic or you can fix it yourself and save some money.OBD Auto Doctor comes to your help if you choose to deal with the problem on your own. This software solution offers users the tools to diagnose, detect or just monitor your car system.
- Publisher: Creosys
- Home page:www.obdautodoctor.com
- Last updated: October 23rd, 2020
This program makes it possible to use J-Link with any RDI compliant debugger. You can set an unlimited number of flash breakpoints, rather than just the 2 hardware breakpoints permitted by the ICE. The package consists of 2 DLLs, which need to be copied to the same folder. In order to use these DLLs, they need to be selected in the debugger.
- Publisher: SEGGER Microcontroller Systeme GmbH
- Last updated: April 22nd, 2014
Obd Key 1 407
MPLAB Integrated Development Environment (IDE) is a free, integrated toolset for the development of embedded applications employing Microchip's PIC and dsPIC microcontrollers.MPLAB IDE runs as a 32-bit application on MS Windows, is easy to use and includes a host of free software components for fast application development and super-charged debugging.
- Publisher: Microchip Technology Inc.
- Home page:www.microchip.com
- Last updated: April 17th, 2018