Programming your Baofeng GT-3 with the cable on WIndows 10: I could not get the Baofeng software to work and ran into some issues with the USB cable driver a. .A driver needed to be added to the operating system.Then someone started to clone the IC chip.As a result, many cables will not work with the Prolific Driver, which is needed for proper operation.The cable is identified by the computer as a “Prolific” cable.Even cables purchased from reputable dealers may have problems.
SETTING UP THE PROLIFIC DRIVER
Monday, September 1, 2014 9:16:29 PM America/Los_Angeles
Before you proceed, please install the prolific 184.108.40.206 driver and restart the computer.
After the prolific driver is installed and the computer is restarted, the system should be able to read from the radio. However, if it does not, please follow the steps below in order to set up the prolific 220.127.116.11 driver.
Prolific Driver For Chirp
Step 6: If you see Prolific 18.104.22.168 in the list, please click it otherwise select the one that is listed.
Prolific Driver Chirping
Chirp Prolific Driver
Step 8: After the procedure is finished, it should look as follows. Free assembler for windows.